Many users do not know how to build an outdoor LED screen well. They think that if the outdoor screen is blown by bad weather, it must be the product quality problem of the LED display manufacturer. This is not the case. This aspect is stable and stable. Our construction is also inseparable. How to correctly install outdoor LED advertising screens has become a matter of special concern to customers, especially for the technical construction personnel of LED manufacturers, how to understand the construction of outdoor screens and the maintenance of advertising screens, so as to better achieve the relationship between the two parties. Cooperation. So how to install the outdoor LED advertising screen correctly? Take a look at the following points.
1. Installation site survey
The installation site visit is the first step to install the LED display. If someone tells you that there must be no problem without looking at the environment, then congratulations, you have been cheated. Before installing outdoor LED advertising screens, we will first make a series of inspections for the installation environment, terrain, luminous radiation range, and brightness acceptance capabilities. In addition! In order to ensure the smooth installation of the outdoor advertising screen, it is required that the display must be tested before installation and lifting, to ensure that the outdoor screen equipment can be used normally and stably, and to avoid doing some useless work.
Second, the construction of the LED display
Before building an outdoor LED billboard, we must first know whether it is an advertising screen, a hanging type, an advertising screen, or a roof-top advertising screen. When it comes to field installation, we should use cranes and hoists to hoist it in sections according to its distance and height, while ensuring that the personnel above the field cooperate with each other, and there is an optimal installation and use process for the high-altitude LED advertising screen.
Third, the radiation range of the LED screen
After installation, we need to check the radiation range of the display. Since the radiation range of each LED outdoor screen is different, the viewing angle of the LED display will also be different. Here, the outdoor LED display should be installed according to the field acceptance ability of the display screen and the normal viewing angle range to ensure that the display screen viewed from every angle can have normal brightness and balanced image and subtitle information.
Fourth, post-maintenance work
The post-maintenance work is also called after-sales service. It is mentioned that the important thing is a post-test work. For example: LED display waterproof test, display heat dissipation layer function, LED display waterproof coating, rain cover on the display screen, heat dissipation function on both sides, whether the power supply to the screen is normal, etc. These basic operations can constitute the entire stable outdoor LED display. In the later stage, uniform management and maintenance of the parts of the display should be carried out. In case the product is rusty, unstable, or damaged, the LED display manufacturers must replace it in time to ensure the safe use of the entire outdoor LED display.
