Recently, there will always be heavy rains in a certain area on the Internet or on TV, and news that residents need to go boating. The extreme heavy rains not only cause a lot of inconvenience to people’s travel, but also may cause some LED display manufacturers’ warehouses. Water ingress causes water ingress into the display screen. In view of the uninterrupted occurrence of such phenomena, what measures should LED display manufacturers take to deal with the ingress of water into the screen? The following is an explanation of the solution to the water ingress of the LED display:
First of all, use a fan or other tools to completely dry the LED display screen body with water at the fastest speed;
Secondly, energize and age the screen after being completely dried. The specific steps are as follows:
(1) Adjust the brightness (full white) to 10%, aging for 8-12 hours after power on;
(2) Adjust the brightness (full white) to 30% and power on and age for 12 hours;
(3) Adjust the brightness (full white) to 60%, and aging for 12-24 hours after power on;
(4) Adjust the brightness (full white) to 80%, aging for 12-24 hours after power on;
(5) Adjust the brightness (full white) to 100%, and aging for 8-12 hours after power on.
After completing the above steps, the LED display screen body will basically return to normal, but there are several precautions in the handling process:
1. When you find water in the warehouse or the LED display screen, you should deal with it urgently and do not delay;
2. Organize personnel to blow-dry the LED display screen that enters the water;
3. Do not put the LED display screen that has been flooded into the air box, it is easy to make the LED light boring;
4. When water enters the warehouse, the air box may enter water. All air boxes should be exposed to the sun to prevent moisture from volatilizing into the LED display screen after the box is installed;
5. Failure to process all flooded LED displays in time may affect the stability of the screen to a greater or lesser extent. During emergency treatment, the screen may die continuously after the screen is powered on, which requires the manufacturer. Pay attention to observation at any time;
6. All flooded LED display screens are in the air box. After more than 72 hours, the screen body is basically of no repair value, and it needs to be handled with caution.
To sum up, in the face of the treatment of water ingress into the display screen, what is most needed is the word "as soon as possible", and the shortest time is the most effective way to deal with it. The longer the delay, the greater the loss. So when you encounter problems such as water ingress in the warehouse, you must act immediately.
